| General | NXR-1800E |
|---|---|
| Frequency Range Type 1 Type 2 |
1 450-520 MHz 2 400-470 MHz |
| Channel Capacity | 32 |
| Channel Spacing Analog Digital | 25 / 12.5 kHz 12.5 / 6.25 kHz |
| PLL Channel Step | 3.125 / 5 / 6.25 kHz |
| Power Supply | 10.8 - 15.6 V DC |
| Current Drain Standby Transmitting | 0.7 A 12.0 A (Max. power), 9.0 A (25 W) |
| Operating Temperature | -22 °F to + 140 °F (-30 ºC to +60 ºC) |
| Frequency Stability | ± 0.5 ppm |
| Antenna Impedance | 50 Ω |
| Dimensions | (W x H x D) Projections Not Included 8.21 x 1.73 x 8.33 in (208.5 x 44.0 x 211.5 mm) |
| Weight Radio | 4.18 lb (1.9 kg) |
| FCC ID Type 1 Type 2 |
K44513200 K44513201 |
| ISED Certification Type 1 Type 2 |
- Type 2 282F-513100 |
*25/30 kHz in VHF/UHF Bands excluding T-Band are not included in the models sold in the USA or US territories.
Analog measurements made per TIA603. Specifications are measured according to applicable standards.
Specifications shown are typical and subject to change without notice, due to advancements in technology.
Details and timing of firmware and software updates are subject to change without notice.
| Receiver | |
|---|---|
| Sensitivity DMR (5 % BER) DMR (1 % BER) NXDN 12.5 / 6.25 kHz (3% BER) Analog (12dB SINAD) | 0.22 μV 0.28 μV 0.25 / 0.20 µV 0.25 µV |
| Selectivity Analog @ 25 / 12.5kHz (TIA603) Analog @ 25 / 12.5kHz (TIA603E) | 83 / 74 dB 80 / 50 dB |
| FM Hum & Noise Analog @ 12.5kHz Analog @ 25kHz | 50 dB 55 dB |
| Intermodulation | 80 dB |
| Spurious Rejection | 90 dB |
| Transmitter | |
| RF Power Output | 40 - 1 W (40 W @ 50% Duty, 25 W @ 100 % Duty) |
| Spurious Emission | -80 dB |
| FM Hum & Noise Analog @ 12.5kHz Analog @ 25kHz | 50 dB 55 dB |
| Audio Distortion | 1% |
| Digital Protocol (DMR) | ETSI TS 102 361-1, -2, -3 |
| Emission Designator | 16K0F3E, 11K0F3E, 7K60FXD, 7K60F7D, 7K60FXE, 7K60F7E, 7K60FXW, 7K60F7W, 8K30F1E, 8K30F1D, 8K30F7W, 4K00F1E, 4K00F1D, 4K00F7W, 4K00F2D |
NXDN™ is a registered trademark of JVCKENWOOD Corporation and Icom Inc.
NEXEDGE® & FleetSync® are a registered trademarks of JVCKENWOOD Corporation.
AMBE+2™ is a trademark of Digital Voice Systems Inc
All other trademarks are the property of their respective holders.
