| Model Name | XR-1700P | ||
|---|---|---|---|
| System | Component speaker | ||
| Power Handling | KITS Spec | ||
| Peak Input Power | 280W | ||
| Maximum Input Power | 100W | ||
| Rated Power | 50W | ||
| CTA Spec (CTA-2031 Compliant) | |||
| RMS Power | 80Watts RMS | ||
| Impedance | 4Ω | ||
| Sensitivity | 86dB/ W at 1 m | ||
| Frequency Response | 57 Hz~20,000 Hz | ||
| Woofer | Diaphragm | Paper Cone | (Gray) |
| Size | Oversized 165 mm | 6-1/2 inch | |
| Surround | Rubber | ||
| Basket | Steel | ||
| Magnet | Ferrite | φ90 x t15 | Tweeter | Diaphragm | Soft Dome |
| Size | 30 mm | 1-3/16 inch | |
| Magnet | Nd | Up to Engineer | |
| Dimension | Woofer | ||
| with Grille | |||
| Width | 180.0 mm | 7-1/16 inch | |
| Height | 180.0 mm | 7-1/16 inch | |
| Depth | 84.0 mm | 3-5/16 inch | |
| without Grille | |||
| Width | 158.0 mm | 6-1/4 inch | |
| Height | 158.0 mm | 6-1/4 inch | |
| Depth | 72.3 mm | 2-7/8 inch | |
| Cut-out Diameter | 126.0 mm | 4-15/16 inch | |
| Mounting Depth | 59.0 mm | 2-5/16 inch | |
| Tweeter (Component) | |||
| Width | 53.0 mm | 2-1/16 inch | |
| Height | 53.0 mm | 2-1/16 inch | |
| Depth | 26.7 mm | 1-1/6 inch | |
| Accessory | Grille | 2 pcs | |
| Grille Holder | ○ | ||
| Punching Net | ○ | ||
| Network | BOX TYPE | 2 pcs | |
| Tweeter | PSW / ATT(2Way) | -12dB/oct | |
| Woofer | -12dB/oct | ||
| Tweeter Bracket | |||
| Mounting HardWare（for 30mm） | ○ | 2 pcs | |
| Angle Mount（for 30mm） | ○ | 2 pcs | |
| GM Bracket | 2 pcs | ||
| Screw sets | |||
| Binding Head Tapping Screw | φ4 x 25 mm | 12 pcs | |
| Binding Head Tapping Screw | φ4 x 6 mm | 8 pcs | |
| Binding Head Tapping Screw | φ3 x 16 mm | 4 pcs | |
| Binding Head Machine Screw | M3 x 6 mm | 2 pcs | |
| Speed Nut | φ3 | 4 pcs | |
| Speed Nut | φ4 | 12 pcs | |
| Adhesive Tape | ○ | 1 set | |
