| CTA-2006 Primary Ratings | Power Output | 40Watts RMS x 4 at 4 Ohms and ≤1%THD+N |
|---|---|---|
| Signal-to-Noise Ratio | 80dBA (Reference: 1Watt into 4Ohms) | |
| Maximum Power Output | MAX POWER | 550W |
| Power Output | Rated Power at 14.4V |
40Watts RMS x [ch] (4 Ohms, 20-20kHz, ≤1.00% THD) 60Watts RMS x [ch] (2 Ohms, 1kHz, ≤1.00% THD) 130Watts RMS x [ch/2] (Bridged 4 Ohms, 1kHz, ≤1.00% THD) |
| Specifications | Signal to Noise Ratio | 100dB (Reference: Rated Power into 4Ohms at 14.4V) |
| Frequency Response | 20Hz-50kHz (+0dB, -3dB) | |
| Input Impedance | 10k ohm | |
| Speaker Impedance |
4Ω (2Ω to 8Ω allowable) Bridged connection 4Ω to 8Ω allowable |
|
| Audio Section | Low-Pass Filter | Built in Variable Low-Pass Filter (50Hz-200Hz, -24dB/oct) |
| High-Pass Filter | Built in High-Pass Filter (80Hz, -12dB/oct) | |
| RCA Input Sensitivity | 0.2[V] - 5.0[V] | |
| Speaker Level Input Sensitivity | 4.0[V] - 12.0[V] | |
| Terminals | Battery & Ground | Screw Type Terminal Block (Nickel colored) (M4) |
| Speaker Output | Screw Type Terminal Block (Nickel colored) (M4) | |
| General | Dimensions(WxHxD) |
335 [mm] x 56 [mm] x 204 [mm] 13-3/16 inch x 2-3/16 inch x 8-1/16 inch |
| Weight (kg) | 2.7 [kg] | |
| Operating Voltage | 14.4V（11-16V allowable） | |
| Current Consumption | 18 [A] | |
| Key Features |
CTA-2006 Compliant 2 Ohms Load Capability Speaker Level Input Signal Sensing Turn-on Power MOS-FET Switching Power Supply Cast Aluminum Heat Sink Design |
|
