About Us

KAC-6406

Title 4/3 Channel Power Amplifier
Amplifier Type Class AB
CEA-2006 Primary Ratings Power Output 40Watts RMS x 4 at 4 Ohms and ≤1%THD+N
Signal-to-Noise Ratio 80dBA (Reference: 1Watt into 4Ohms)
Maximum Power Output MAX POWER 500W
Power Output Rated Power at 14.4V 40Watts RMS x [ch] (4 Ohms, 20-20kHz, ≤1.0% THD)
60Watts RMS x [ch] (2 Ohms, 1kHz, ≤1.0% THD)
130Watts RMS x [ch/2] (Bridged 4 Ohms, 1kHz, ≤1.0% THD)
Specifications Signal to Noise Ratio 100dB (Reference: Rated Power into 4Ohms at 14.4V)
Frequency Response 5Hz-50kHz (+0dB, -3dB)
Class AB
Input Impedance 10k ohm
Speaker Impedance 4Ω (2Ω to 8Ω allowable)
Bridged connection 4Ω to 8Ω allowable
Audio Section

Low-Pass Filter
Bch

Built in Variable Low-Pass Filter (50Hz-200Hz, -24dB/oct)
High-Pass Filter
Ach
Built in High-Pass Filter (80Hz, -12dB/oct)
Filter Selector 1
Ach
HPF-OFF
Filter Selector 2
Bch
LPF-OFF
RCA Input Sensitivity 0.2[V] - 5.0 [V]

Speaker Level Input Sensitivity

4.0[V] - 12.0 [V]
Terminals Battery & Ground Screw Type Terminal Block (Ni) (M6)
Speaker Output Screw Type Terminal Block (Ni) (M4)
Line In RCA (Ni)
Speaker Input JST Connector
General Dimensions(WxHxD) 315 [mm] x 56 [mm] x 200 [mm]
12-3/8 inch x 2-3/16 inch x 7-7/8 inch
Weight  (kg) 2.1 [kg] 4.5 [lbs]
Operating Voltage 14.4V(11-16V allowable) [V]
Current Consumption 18 [A]
Key Features

CEA-2006 Compliant
2 Ohms Load Capability
Speaker Level Input
Signal Sensing Turn-on
Power MOS-FET Switching Power Supply
Cast Aluminum Heat Sink Design

Others

Triangle Indicator