TM-D710GA / TM-D710GE
Memory Control Program
MCP-6A Version 1.03
|
Last updated : March 12, 2020
|
|
|
|
| Welcome |
Thank you for choosing the KENWOOD products.
By utilizing this software, you can enjoy the versatility of the TM-D710GA/GE transceivers through the memory channel management or edit functions.
|
| |
| About this software |
 |
You can use the MCP-6A to create data such as memory channels and menus on a PC by connecting the TM-D710GA/GE to the PC. |
|
An optional Programming Cable (PG-5G, or PG-5H Serial communications cable) is necessary. |
|
The MCP-6A can retrieve memory channel frequencies by opening ([File] [Open]) data files which are created by the following KENWOOD Memory Control Programs. Click to see the details. |
 |
This software is not compatible with the TM-D710A/E, TM-V71A/E, or RC-D710. For these products, please use the MCP-2A. |
|
| |
| Operating Environments |
| 1. |
Operating System (OS) |
| |
Windows® 8.1 (32-bit or 64-bit)
Windows® 10 (32-bit or 64-bit)
|
| |
Notes:
|
This software is designed to run on the above operating systems. |
|
This software also runs on Windows® 11. (Noted on June 23, 2022) |
|
Applicable operating systems are subject to change without notice due to the end of the technical support by Microsoft Corporation or change of the product specifications. |
|
| 2. |
Processor |
| |
At least the recommended CPU for each OS is required to run this program. |
| 3. |
System Memory (RAM) |
| |
At least the recommended system memory for each OS is required to run this program. |
| 4. |
Hard Disk Free Space |
| |
To install this software, 30 MB or more of hard disk space is required. |
| 5. |
Runtime |
| |
Microsoft .NET Framework 4.0. |
| 6. |
Peripheral Devices |
| |
|
A display with at least XGA (1024 x 768), 16-bit color or higher is recommended. |
|
A keyboard and pointing device (such as a mouse) are required. |
|
An RS-232C port is required.(The MCP-6A supports from COM1 to COM20) |
|
|
| |
| Attention |
|
Before starting to edit the data in the MCP-6A, you must first "Read" data from the transceiver.
(The MCP-6A must recognise the exact model type of the transceiver.) Writing data to the transceiver without reading the transceiver's exact model type, may result an error.
|
|
When you exchange the channel data between different model types such as "TM-D710GA and TM-D710GE", please use the MCP-6A's Import / Export function.
(Please refer to the MCP-6A's help file for detail)
|
|
Turn the transceiver OFF before connecting it to a PC. |
|
When the transceiver's EchoLink Sysop mode is ON, it cannot communicate with the MCP-6A. |
|
| |
| Notes on usage |
|
Users may not assign, rent, lease, redistribute, or resell the software. |
|
Users may not revise, change, translate, merge, de-compile, or reverse engineer the software. |
|
The quality and performance of the software is not warranted for the applicability of any users.
JVCKENWOOD Corporation shall not assume liability for any defects, nor warrant anything other than is expressly provided in the agreement.
The selection and introduction of the products as well as the results there from shall be upon the liability of the users.
|
|
JVCKENWOOD Corporation shall own all copyrights and other intellectual properties for the software and all manuals and documents attached to the software.
The user shall be allowed to use, not to resell, the software by obtaining a license from JVCKENWOOD Corporation.
While the media in which the software is stored is possessed by the user, the ownership for the software itself shall be reserved for JVCKENWOOD Corporation.
|
|
| |
| Installing the MCP-6A |
Extract the downloaded file "M6A103.zip" into a designated folder.
In the designated folder, a folder labeled "M6A103" will be created.
Execute the "setup.exe" in the folder labeled "M6A103", and follow the instructions that appear on the display to install MCP-6A.
|
Notes:
|
The MCP-6A does not operate properly when selecting other models; you must select the correct model. |
|
The MCP-6A automatically creates a data folder as "...\Documents\KENWOOD\MCP6A". |
|
You must be an authorized Administrator to install the MCP-6A. |
|
To change the help file's language (English / Japanese) you must re-install the MCP-6A. |
|
| |
| Uninstalling the MCP-6A |
Select "MCP-6A" in "Control Panel - Programs and Features" for Windows® 8.1, or in "Settings - Apps & features" for Windows® 10, and follow the instructions that appear on the display to uninstall the software.
Or double-click "setup.exe", and follow the instructions that appear on the display to uninstall the software.
Notes:
|
|
|
Created files using the MCP-6A are not deleted by uninstalling the software; you must manually delete any files that you created. |
|
You must be an authorized Administration to uninstall the MCP-6A. |
|
| |
| Update History |
| Ver.1.03 (March 12, 2020) |
|
Fixes some data errors which occur when opening a saved file. |
|
 |
| Ver.1.02 (August 9, 2018) |
|
Adds Windows® 10 compatibility. |
|
|
Revises the help file. |
|
|
| Ver.1.01 (February 19, 2015) |
|
Adds Windows® 8.1 compatibility. |
|
|
Revises the help file. |
|
|
| Ver.1.00 (November 15, 2013) |
|
First Release |
|
|
If you agree with the details listed above, click the following link to download the latest MCP-6A software.
(The latest version includes all previous updates.)
|
|
| Download MCP-6A Version 1.03 (filename: M6A103.zip ; file size: 28.2MB) |
|
|
|
Windows and Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. |
|
.NET Framework is a trademark or a registered trademark of Microsoft Corporation in the United States and/or other countries. |
|
EchoLink is a registered U.S.A. trademark of Synergenics, LLC. |
|
