KMR-M508DABDigital Media Receiver
with Bluetooth & DAB Tuner
×
With Alexa on your KENWOOD Receivers, you can use your voice to control your music and much more. Using Alexa is as easy as asking a question. Just ask and Alexa can play your favorite song, skip to the next track, change the volume, read you the news and more.
Using Alexa on the Kenwood Receiver is simple and hands-free, just ask and Alexa will respond instantly.
*For more information, visit https://www.kenwood.com/car/app/amazon_alexa/eng/
Listen to popular music applications and music stored on your device with basic audio controls.
Up to 5 Bluetooth® devices can be paired to the head unit at the same time. You can enjoy audio streaming just by switching the devices among your friends.
While you are connected through Bluetooth, with a touch of a button you can switch between two phones.
Download the free app “KENWOOD Remote“. You can change audio sources or adjust audio settings like “Time Alignment” or “13-Band EQ” from your smartphone.
Compatible with a broad range of audio file formats from FLAC and WAV, to MP3, WMA and AAC.
Music Codec | Playable up to |
---|---|
FLAC | ~96kHz / ~24bit |
WAV | ~44.1kHz / ~16bit |
MP3 | ~48kHz / ~320kbps |
WMA | ~48kHz / ~192kbps |
AAC | ~48kHz / ~320kbps |
13-Band equalizer and DTA gives optimal tuning enhancements for the listener.
Sound coming from a variety of speakers located within your car are time aligned to arrive at your ear at exactly the same time.
Drive EQ boosts specific frequencies in the audio signal to compensate the negative impact of road noise.
Easy front panel connection for your compatible USB- enabled devices. These include Mass Storage Class devices like iPods, smartphones, and USB flash drives. The USB input will allow you to charge and control the music playback of your select devices.
Bright variable color LED's can be adjusted to match your environment.
With audio receivers shorter in depth, installation is made easier in a wider range of cars.
Improved moisture resistance of the circuit boards to prevent corrosion.
CD Player | No |
---|---|
Key Illumination / LCD - LED Backlight | / |
Built-in Bluetooth | 2-Phone Hands Free / Music Mix / KENWOOD Remote App |
USB Terminal | x1 |
Audio Decoder | FLAC / WAV / AAC / MP3 / WMA |
Equalizer / Digital Time Alignment / 3-Way X'Over | 13 Band / Yes / Yes |
Audio Preout | 2.5V / 2Preouts |
Remote Controller | - |
Purchase KENWOOD Products ONLY from Authorized KENWOOD Retailers! Because KENWOOD cannot guarantee that car audio product purchased from unauthorized dealers are genuine, new and/or fit for purchase, KENWOOD does NOT offer any manufacturer's limited warranty or rebates for car audio products purchased from a dealer that is not authorized by KENWOOD.
FM | Frequency Range(MHz) | 87.5MHz to 108.0MHz |
---|---|---|
(Frequency step) | (50kHz) | |
Usable Sensitivity | 6.2 dBf | |
S/N:30dB | (0.56μV/75Ω) | |
Quieting Sensitivity | 15.2 dBf | |
DIN S/N:46dB | (1.58μV / 75Ω ) | |
Frequency Response | 30Hz to 15kHz | |
(±3.0dB) | ||
S/N(dB) | 68.0dB(MONO) | |
Stereo Separation | 40dB(1kHz) | |
MW (AM) |
Frequency Range | 531kHz to 1611kHz |
(Frequency step) | (9kHz) | |
Channel Space Selection | ||
Usable Sensitivity | 28.5μV | |
S/N:20dB | ||
LW | Frequency Range(kHz) | 153kHz to 279kHz |
(Frequency step) | (9kHz) | |
Usable Sensitivity | 45μV | |
(S/N 20dB) | ||
DAB | Frequency Range | BAND III= 174.928MHz to 239.200MHz |
Sensitivity | -100dBm | |
S/N | 90dB | |
DAB Antenna Connector |
Connector type | SMB |
Output Voltage | DC 12V | |
Maximum Current | <100mA | |
Preout Level(mV)/Load -Unbalanced | 2,500mV/10kΩ | |
Preout Impedance(Ω) | =<600Ω | |
Speaker Impedance(Ω) | 4 to 8Ω | |
USB I/F | USB | USB 1.1 / 2.0 High Speed |
File System | FAT12 / 16 / 32 | |
Maximum Supply current | DC5V(DC logo) 1.5A | |
Frequency Response | 20Hz to 20kHz(±1dB) | |
S/N Ratio (dB) | 98dB(1kHz) | |
Dynamic Range | 93dB | |
Channel Separation | 90dB | |
MP3 Decode | Compliant with MPEG-1/2 Audio Layer-3 | |
WMA Decode | Compliant with Windows Media Audio | |
AAC Decode | AAC-LC ".aac", ".m4a" files | |
WAV Decode | Linear-PCM | |
FLAC Decode | FLAC file (Up to 96kHz/24bit) | |
AUX Input |
Frequency Response | 20Hz to 20kHz ±3dB |
Input Maximum Voltage | 1,000mV | |
Input Impedance | 30kΩ | |
AMP | Maximum Power | 50Wx4 |
Full Bandwidth Power | 22Wx4 | |
(at less than 1%THD) | ||
TONE | Band1 | 62.5Hz ±9dB |
Band2 | 100Hz ±9dB | |
Band3 | 160Hz ±9dB | |
Band4 | 250Hz ±9dB | |
Band5 | 400Hz ±9dB | |
Band6 | 630Hz ±9dB | |
Band7 | 1kHz ±9dB | |
Band8 | 1.6kHz ±9dB | |
Band9 | 2.5kHz ±9dB | |
Band10 | 4kHz ±9dB | |
Band11 | 6.3kHz ±9dB | |
Band12 | 10kHz ±9dB | |
Band13 | 16kHz ±9dB | |
Bluetooth | Version | Bluetooth 4.2 |
Frequency Range | 2.402 to 2.480GHz | |
RF Output Power (E.I.R.P.) | +4dBm (MAX), Power Class 2 | |
Maximum Communication range | Line of sight approx.10m(32.8ft) | |
Profile | HFP 1.7.1 (Hands Free Profile) | |
SPP(Serial Port Profile) | ||
PBAP(Phonebook Access Profile) | ||
A2DP(Advanced Audio Distribution Profile) | ||
AVRCP 1.6.1 (Audio/Video Remote Control Profile) | ||
GENE | Operating voltage | 12V DC car battery |
Installation Size (W) | 182(mm) | |
(H) | 53(mm) | |
(D) | 100(mm) | |
Net Weight | 0.7(kg) (Trim plate and Mounting sleeve: Included) |