KENWOOD VoIP Program
ARVP-10 Version 1.03
Last updated : August 30, 2018
 
About this software
This software is a VoIP program for the KENWOOD NETWORK COMMAND SYSTEM to carry out voice communication between the remote PC and the host PC via a network. (For the TS-890S, the ARVP-10 is only used when not using the TS-890S's built-in direct remote-control function.).
When the ARVP-10 does not work on your PC, OS, or network environment, you may use a commonly-used VoIP software (such as a P2P telephony software) for making voice communications via a network instead of the ARVP-10.(You are responsible for the selection, installation and operation using the VoIP software.)
 
Operating Environments
1. Operating System (OS)
  Windows® 7 (SP1 or later) (32-bit or 64-bit)
Windows® 8.1 (RTM or later) (32-bit or 64-bit)
Windows® 10 (Version 1703 (OS Build 15063.0) or later) (32-bit or 64-bit)
Note:
This software is designed to run on the above operating systems.
This software also runs on Windows® 11. (Noted on June 23, 2022)
Applicable operating systems are subject to change without notice due to the end of the technical support by Microsoft Corporation or change of the product specifications.
2. Processor
  Faster than the recommended CPU for each OS.
3. System Memory (RAM)
  Larger than the recommended System Memory for each OS.
4. Free Hard Drive Space
  100 MB or more of free hard drive space.
5. Peripheral Devices
 
A display with resolutions higher than VGA (640 x 480).
 
A keyboard and a mouse, or other pointing devices.
 
Sound device.
 
Network function.
 
Networking environment (LAN or high-speed broadband).
 
Usage Notes
Audio data that flows on the network is not encrypted by the ARVP-10.
Users are prohibited to assign, rent, lease, redistribute, or resell the software.
Users are prohibited to revise, change, translate, merge, de-compile, or reverse engineer the software.
JVC KENWOOD Corporation does not warrant that quality and functions of this software comply with each user's purpose of use of this software, and unless specifically described in this document, JVC KENWOOD Corporation shall be free from any responsibilities to any defects and indemnities to any damages or losses. Selection and installation of this software shall be made by the User's designation. The User shall take for the use and effects of this software.
JVC KENWOOD Corporation shall be free from any responsibilities for any incidental losses or damages, such as missing communications or a calling opportunity caused by a failure or performance error of this software.
JVC KENWOOD Corporation shall own all copyrights and other intellectual properties for the software and all manuals and documents attached to the software. The user shall be allowed to use, not to resell, the software by obtaining a license from JVC KENWOOD Corporation. While the media in which the software is stored is possessed by the user, the ownership for the software itself shall be reserved for JVC KENWOOD Corporation.
 
Installing the ARVP-10
Extract the downloaded file "ARVP10_103.zip" into a designated folder.
In the designated folder, a folder labeled "ARV10_103" will be created.
Execute the "Setup.exe" in the folder labeled "ARVP10_103", and follow the instructions that appear on the display to install ARVP-10.
The ARVP-10H and ARVP-10R are installed at the same time.
The ARVP-10H program provides the VoIP function at the host PC (to which the transceiver is connected) and the ARVP-10R program provides the VoIP function at the remote PC (which controls the transceiver remotely).
Note:
Administrator privileges are required when installing the software.
To update ARVP-10, execute the same procedure as used for installation, and follow the instructions that appear on the display to install the software. The latest update is written and installed over the currently installed program.
 
Uninstalling the ARVP-10H
Select "ARVP-10" in "Control Panel - Programs and Features" for Windows® 7/8.1, or in "Settings - Apps & features" for Windows® 10, and follow the instructions that appear on the display to uninstall the software. Or double-click "Setup.exe", and follow the instructions that appear on the display to uninstall the software.
Administrative privileges are required to uninstall ARVP-10.
Always exit ARVP-10 before uninstalling the software.
If you agree with the details listed above, click the following link to download the ARVP-10 software.
(The latest version includes all previous updates.)
ARVP-10 Ver.1.03 :ARVP10_103.zip 7.60MB download
 
Update History
Ver.1.03 (August 30, 2018)
Adds Windows® 10 compatibility.
Ver.1.02 (October 31, 2014)
Adds Windows® 8.1 compatibility.
Ver.1.01 (July 12, 2013)
Adds Windows® 8 compatibility.
Ver1.00 (June 30, 2011)
First Release
Microsoft®, Windows®, and Windows logo are registered trademarks of Microsoft Corporation in the United States and/or other countries.